( 4W-BM404750) 4W-BM404750 SHOCKS 40MM ADJUSTABLE FRONT

NISSAN / PATROL / 2013-UP

40Mm Adjustable Strut ( 9 Stage Adjustable) Y62 Patrol Front Pair of 40mm Bore Adjustable Strut Shock Absorbers Tough Dog Nissan Patrol Y62

( 4W-BM401220) 4W-BM401220 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR

NISSAN / PATROL / 2013-UP

40Mm 9 Stage Adjustable (Up To 40Mm Lift) Y62 Patrol rear Pair of 40mm Bore Adjustable Shock Absorbers Rear Tough Dog 40mm bore adjustable shocks to suit Nissan Patrol Y62 (suits non hydraulic suspension models only) The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with our Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. Sold as a pair they will suit the rear of your Nissan Y62 Patrol from standard height through to 40mm raised suspension. *Same shock covers both applications.

( 4W-BM401069) 4W-BM401069 SHOCKS 40MM ADJUSTABLE FRONT

JEEP / WRANGLER / 2007-2018

Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings 40Mm Adjustable Shock (Suits Up To 40Mm Lift)

( 4W-BM401463) 4W-BM401463 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR

JEEP / WRANGLER / 2007-2018

Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings 40Mm 9 Stage Adjustable Shock (Suits 40Mm Lift )

( 4W-BM401117) 4W-BM401117 SHOCKS 40MM ADJUSTABLE SHOCKS REAR

TOYOTA / TUNDRA / 2007-UP

Tundra 07 On rear 40mm lift Pair of 40mm Bore Adjustable Shock Absorbers 40Mm Adjustable Shocks (Suits 45Mm Lift)

( 4W-BM404910) 4W-BM404910 SHOCKS 40MM ADJUSTABLE STRUT FRONT

TOYOTA / TUNDRA / 2007-UP

Pair of Shock Absorbers (Tough Dog) Tundra/07 On/Front/40mm lift Pair of 40mm Bore Adjustable Strut Shock Absorbers 40Mm Adjustable Stru (Suits Up To 45M Lift)

( 4W-BM404900) 4W-BM404900 SHOCKS 40MM ADJUSTABLE STRUT FRONT

TOYOTA / LANDCRUISER / 2007-UP

Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings

( 4W-BM401114) 4W-BM401114 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR

TOYOTA / LANDCRUISER / 1998- UP

Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings 40Mm 9 Stage Adjustable (Suits Up To 25Mm Lift)

( 4W-BM404400) 4W-BM404400 SHOCKS 40MM ADJUSTABLE FRONT

TOYOTA / FJ CRUISER / 2011-2016

PRODUCT DESCRIPTION Features 40mm internal bore 60mm ernal casing 18mm Chrome plated rod High temperature fluid Foam cell 9 Stage ernal adjustment Additional welding on all studs and eyerings 40Mm Adjustable Strut

( 4W-BM401116) 4W-BM401116 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR

TOYOTA / FJ CRUISER / 2011-2016

Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings 40Mm 9 Stage Adjustable (40Mm Lift)

( 4W-BM401047) 4W-BM401047 SHOCKS 40MM 9 STAGE ADJUSTABLE FRONT

NISSAN / PATROL / 1997-2016

Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings *Representative Image Contents May Vary

( 4W-BM401206) 4W-BM401206 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR

NISSAN / PATROL / 1997-2016

Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings

( 4W-BMX454750) 4W-BMX454750 SHOCKS 45MM ADJUSTABLE FRONT

NISSAN / PATROL / 2013-UP

DESCRIPTION Front Set of 2 Shock Absorber Tough Dog Pair of 45mm Bore Adjustable Shock Absorbers Official Tough Dog Dealer. BIG BORE Adjustable shock absorbers feature a 45mm bore, 70mm external casing, and a 22mm piston rod. Designed to fit heavy duty vehicles especially those with lift kit fitted. With internal DU bushings fitted, these shocks are perfect for all BIG LIFT, OFFROAD work.

( 4W-BMX1220/2) 4W-BMX1220/2SHOCKS 45MM 9 STAGE ADJUSTABLE REAR

NISSAN / PATROL / 2013-UP

Details: Rear Tough Dog 45mm Big Bore adjustable shocks absorbers to suit Nissan Patrol Y62 (excludes hydrualic suspension models) These tough puppies are the largest bore externally adjustable shocks available on the market. There is nothing that can compare to the 45mm bore in a 70mm outer casing. This is one serious shock. Similar adjustability to the amazing Rancho 9000XL, this shocks bigger bore makes it ideal for heavily-laden coil-sprung vehicles set up for off-road touring. It has a 9-position external knob that allows you to alter the shocks firmness in a matter of seconds. Shock Features: - A massive 45mm bore for superior spring control, and more efficient operation. - A virtually unbreakable 22mm diameter double chrome plate piston rod. - A whopping 70mm diameter body (reserve tube) for maximum oil-capacity and cooler running. - Foam-cell technology (as opposed to gas-charge) to control oil-foaming without the consequences associated with a gas-charge shock. - Both an internal rebound bump-stop, and external compression bump-stop for long-term durability. - Externally-adjustable 9-position ride-adjustment knob for your choice of ride-control. Like 9 shocks in one! Affects both compression and rebound stroke. The Tough Dog 45mm bore shocks are built tough for the Australian outback. Sold as a pair, they will suit the rear of Nissan Patrol Y62 with either standard suspension and raised suspension up to 40mm lift . *Same shock covers both applications.

( 4W-BMX454900) 4W-BMX454900 SHOCKS 45MM ADJUSTABLE FRONT

TOYOTA / LANDCRUISER / 2007-UP

DESCRIPTION These tough puppies are the largest bore externally adjustable shocks available on the market. There is nothing that can compare to the 45mm bore in a 70mm outer casing. This is one serious shock. The 9 stages of adjustment mean you can control the firmness of your shocks easily, and adapt to the conditions as required. Choose a firmer ride for your highway travels, and then dial them down when it’s time to get down to business. 45mm big bore adjustables are designed for big lift applications up to six inches over factory in some vehicles. Our adjustable shocks are built tough for the Aussie outback. As well as the Foam Cell insert to combat shock fade, the 45mm adjustable also incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. Our big bore shocks also have a DU bushing fitted internally to protect the seals from damage caused by side load at full extension. 45mm internal bore 70mm external casing 22mm chrome plated rod High temperature, all weather oil Foam cell technology 9 Stage external adjustment Additional welding on all studs and eyerings

( 4W-BMX1114/2) 4W-BMX1114/2 SHOCK 45MM 9 STAGE ADJUSTABLE REAR

TOYOTA / LANDCRUISER / 1998-2007

DESCRIPTION Rear Set of 2 Shock Absorber Tough Dog Pair of 45mm Bore Adjustable Shock Absorbers Official Tough Dog Dealer. BIG BORE Adjustable shock absorbers feature a 45mm bore, 70mm external casing, and a 22mm piston rod. Designed to fit heavy duty vehicles especially those with lift kit fitted. With internal DU bushings fitted, these shocks are perfect for all BIG LIFT, OFFROAD work.

( 4W-BMX1047/2) 4W-BMX1047/2 SHOCKS 45MM 9 STAGE ADJUSTABLE FRONT

NISSAN / PATROL / 1997-2016

Pair of 45mm Bore Adjustable Shock Absorbers Official Tough Dog Dealer. BIG BORE Adjustable shock absorbers feature a 45mm bore, 70mm external casing, and a 22mm piston rod. Designed to fit heavy duty vehicles especially those with lift kit fitted. With internal DU bushings fitted, these shocks are perfect for all BIG LIFT, OFFROAD work.

( 4W-BMX1206/2) 4W-BMX1206/2 SHOCKS 45MM 9 STAGE ADJUSTABLE REAR

NISSAN / PATROL / 1997-2016

DESCRIPTION BMX1206/2 4X4 Shock Absorber Tough Dog suits Nissan Patrol GU Y61 Pair of 45mm Bore Adjustable Shock Absorbers Official Tough Dog Dealer. BIG BORE Adjustable shock absorbers feature a 45mm bore, 70mm external casing, and a 22mm piston rod. Designed to fit heavy duty vehicles especially those with lift kit fitted. With internal DU bushings fitted, these shocks are perfect for all BIG LIFT, OFFROAD work.

( 4W-TDC734SL) 4W-TDC734SL SPRING 25MM LIFT FRONT

NISSAN / PATROL / 1997-2016

DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Coil COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift LWB up to Bullbar - FRONT

( 4W-TDC742SL) 4W-TDC742SL SPRING 25MM LIFT 0-300KG LOAD REAR

NISSAN / PATROL / 1997-2016

Shot Peened To Relieve Stress, Cragged And Load Tested, Formed On Precision Mandrels, Accurate Heat Treatment To Ensure The Spring Performs As Designed, Powder-Coated For Looks And Corrosion Resistance,O.E Height Up To 6” Lift Available, New Generation X5K Steel Used In Most Applications.

( 4W-TDC731) 4W-TDC731 SPRING 25MM LIFT FRONT

NISSAN / PATROL / 1988-1998

DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Coil COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) suits 2in Lift SWB w/Bar - FRONT 25Mm Lift Coil (Suit Swb With Alloy Bar)

( 4W-TDC733) 4W-TDC733 SPRING 25MM LIFT 0-300KG LOAD REAR

NISSAN / PATROL / 1988-1998

DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 25mm Lift Spring COMPATIBILITY Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - SWB - REAR 25Mm Lift 0-300Kg Load ( Suit Swb)

( 4W-TDC790L) 4W-TDC790L SPRING 2 40MM LIFT FRONT

NISSAN / PATROL / 2013-UP

DESCRIPTION Designed in Australia, Tough Dog leaf springs offer a spring pack for just about any application you might require. Our springs are a proven performer in any situation. Tough Dog leaf springs are a truly progressive rate leaf spring. Each leaf is set slightly higher than the leaf above so there is contact along the whole length of each leaf. There are single stage and two stage springs available for different applications. Primary and secondary stage leaves ensure that the vehicle’s ride remains uncompromised. As the spring is compressed under load, the heavier second stage leaves come into play to prevent excessive sag & remove high stresses from the primary stage. Precision mandrel & die-formed Oil quenched, hardened & tempered for maximum life. Military wrap for safety Accurately heat-treated Manufactured from high grade spring steel Anti-friction pads in most applications Pre-stressed to maintain ride height Diamond cut ends Load rate tested SPECIFICATIONS 40mm Lift Spring COMPATIBILITY Nissan Patrol 2010+ Y62 (Non Hydraulic Suspension only) Petrol w/Bar - FRONT

( 4W-TDC795) 4W-TDC795 SPRING 0-120KG LOAD 40MM REAR

NISSAN / PATROL / 2013-UP

DESCRIPTION Designed in Australia, Tough Dog leaf springs offer a spring pack for just about any application you might require. Our springs are a proven performer in any situation. Tough Dog leaf springs are a truly progressive rate leaf spring. Each leaf is set slightly higher than the leaf above so there is contact along the whole length of each leaf. There are single stage and two stage springs available for different applications. Primary and secondary stage leaves ensure that the vehicle’s ride remains uncompromised. As the spring is compressed under load, the heavier second stage leaves come into play to prevent excessive sag & remove high stresses from the primary stage. Precision mandrel & die-formed Oil quenched, hardened & tempered for maximum life. Military wrap for safety Accurately heat-treated Manufactured from high grade spring steel Anti-friction pads in most applications Pre-stressed to maintain ride height Diamond cut ends Load rate tested SPECIFICATIONS 40mm Lift Spring COMPATIBILITY Nissan Patrol 2010+ Y62 (Non Hydraulic Suspension only) - REAR

Allows You To To Transport A Bike With 12Mm X 100Mm Thru Axle Forks On Any Fork Mounted Bike Rack That Takes Standard 9Mm Dropouts.
Durable Black Powder Coat Finish.
Built In Safety Tabs.

20Mm Fork Adapter For Rooftop Fork-Mount Bike Racks.
Works With Yakima Mounts And Other Fork Mount Bicycle Carriers.
Supports Freeride And Downhill Bikes With 20Mm Front Axles.
Compatibility: All Fork Bike Racks.
Axle Size: 15 Millimeter.
Finish: Powder Coated.
Color: Black.
Built-In Safety Tabs.
Durable Black Powder Coat Finish That
Fits All Fork Bike Mounts Including, Yakima, Thule, Rocky Mounts, Etc.

( 4W-BM401377) 40mm 9 Stage Adjustable REAR Shocks (Landcruiser 71-79 Series)

TOYOTALANDCRUISER - 71, 74 SERIES - HZJ71 & HZJ74

DESCRIPTION The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with our Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Our adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings SPECIFICATIONS 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota 4Runner 11/1985 - 1989 IFS with Leaf Rear 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Hilux 11/1983 - 1997 Leaf/Leaf 4WD 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Hilux 10/1988 - 1997 Torsion Bar Front 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Hilux 10/1997 - 2005 Torsion Bar Front 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Landcruiser 11/1984 - 1992 70, 73, 74 Series 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits 50mm Lift - Toyota Landcruiser 11/1984 - 1999 75 Series 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 2007+ 76 Series Wagon 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 1993 -1999 77 Series FZJ77, HZJ77, PZJ77 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) 2x REAR 40mm 9 Stage Adjustable Shock Absorbers - suits up to 50mm Lift - Toyota Landcruiser 2012+ 79 Series Dual Cab COMPATIBILITY Toyota 4Runner 11/1985 - 1989 IFS with Leaf Rear Toyota Hilux 11/1983 - 1997 Leaf/Leaf 4WD Toyota Hilux 10/1988 - 1997 Torsion Bar Front Toyota Hilux 10/1997 - 2005 Torsion Bar Front Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB Toyota Landcruiser 11/1984 - 1992 70, 73, 74 Series Toyota Landcruiser 11/1984 - 1999 75 Series Toyota Landcruiser 2007+ 76 Series Wagon Toyota Landcruiser 1993 -1999 77 Series FZJ77, HZJ77, PZJ77 Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) Toyota Landcruiser 2012+ 79 Series Dual Cab

( 4W-BM401050) 40mm 9 Stage Adjustable Front Shocks (Landcruiser 71-79 Series)

LAND CRUISER 71,74 SERIES

DESCRIPTION The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with our Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Our adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings SPECIFICATIONS 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser 2007+ 76 Series Wagon 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) 2x FRONT 40mm 9 Stage Adjustable Shock Absorbers - suit up to 50mm Lift - Toyota Landcruiser 2012+ 79 Series Dual Cab COMPATIBILITY Toyota Landcruiser HZJ71 and HZJ74 71, 74 Series SWB and LWB Toyota Landcruiser 2007+ 76 Series Wagon Toyota Landcruiser 10/1999+ 78, 79 Series inc V8 (Except Dual Cab) Toyota Landcruiser 2012+ 79 Series Dual Cab

( 4W-FC404932) FRONT Up to 40mm Lift - STRUT Only FOAM CELL TOYOTA LANDCRUISER 300 SERIES 2021-UP

TOYOTA LANDCRUISER 300 SERIES 2021-UP

Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application. The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade. Large 40mm internal bore Twin tube design High temperature, all weather oil 18mm, double chrome-plated rod Additional welding on all studs & eyerings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop *Representative Image Contents May Vary

( 4W-FC43041) REAR 35mm Lift FOAM CELL - SHOCK ABSORBER TOYOTA LANDCRUISER 300 SERIES 2021-UP

TOYOTA LANDCRUISER 300 SERIES 2021-UP

Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application. The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade. Large 41mm internal bore Twin tube design High temperature, all weather oil 18mm, double chrome-plated rod Additional welding on all studs & eyerings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop *Representative Image Contents May Vary

45 Degree Hose
Size: 2"

45 Degree Hose
Size: 1.5"

45 DEGREE HOSE 2.5",85MM,BLUE

45 DEGREE HOSE 3",88MM,BLUE

45 DEGREE HOSE 3.5",90MM,BLUE

45 DEGREE HOSE 4",93MM,BLUE

Suits Bottom Front Eyering (Eyering Bonded Bushing)

Description
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application.

In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications.

40mm internal bore
60mm external casing
18mm chrome-plated rod
High temperature, all weather oil
Foam cell
9 Stage external adjustment
Additional welding on all studs and eye rings

40Mm 9 Stage Adjustable (40Mm Lift)

Tundra 07 On rear 40mm lift Pair of 40mm Bore Adjustable Shock Absorbers
40Mm Adjustable Shocks (Suits 45Mm Lift)

Description
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application.

In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications.

40mm internal bore
60mm external casing
18mm chrome-plated rod
High temperature, all weather oil
Foam cell
9 Stage external adjustment
Additional welding on all studs and eye rings
40Mm 9 Stage Adjustable Shock (Suits 40Mm Lift )

PRODUCT DESCRIPTION
Features

40mm internal bore
60mm ernal casing
18mm Chrome plated rod
High temperature fluid
Foam cell
9 Stage ernal adjustment
Additional welding on all studs and eyerings

40Mm Adjustable Strut

DESCRIPTION
The Tough Dog EXT steering damper is our affordable, heavy duty replacement damper.
Designed for mild applications as a replacement damper when the OEM gear just isn’t quite cutting the mustard, this damper will give you control and feeling back in your steering set up. With a 35mm internal bore and our Foam Cell insert to fight against fade in harsh use situations, this damper is the perfect companion for anyone looking to gain a new lease on life from their steering.

Superb road handling characteristics
35mm bore for heavy-duty use
Eliminate shimmy
Large range to suit most 4WD applications

H/Duty Replacement Damper

The Tough Dog EXT steering damper is our affordable, heavy duty replacement damper.
Designed for mild applications as a replacement damper when the OEM gear just isn’t quite cutting the mustard, this damper will give you control and feeling back in your steering set up. With a 35mm internal bore and our Foam Cell insert to fight against fade in harsh use situations, this damper is the perfect companion for anyone looking to gain a new lease on life from their steering.

uperb road handling characteristics
35mm bore for heavy-duty use
Eliminate shimmy
Large range to suit most 4WD applications

DESCRIPTION
EXT5617 Tough Dog Steering Damper
Extra Heavy Duty Foam Cell Steering Damper
Official Tough Dealer.

Designed as a replacement damper for when OEM gear just isn’t quite cutting the mustard.
This damper will give you back control and feeling in your steering set up.
35mm internal bore and Foam Cell insert resists fade in hard use situations.
Product Type: Tough Dog - Steering Damper

Description
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application.

The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade.

Large 41mm internal bore
Twin tube design
High temperature, all weather oil
18mm, double chrome-plated rod
Additional welding on all studs & eyerings
Multi stage Velocity Sensitive Valving
Rod wiper seal and multi lip seal
Hydraulic rebound stop
Fitment Note for use with Prado 120 Grande:
Aftermarket replacement strut will eliminate the factory electronic shock control.

DESCRIPTION
Front Set of 2 Shock Absorber Tough Dog
Pair of 41mm Bore Foam Cell Strut Shock Absorbers
Official Tough Dog Dealer.
Tough Dog Foam Cell shocks are a large bore shock, (41mm) that are built for heavy-duty use and for coil sprung vehicles. The use of micro-cellular foam inserts has produced a new breed of shocks, which are more resistant to fade.

Description
Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application.

The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade.

Large 41mm internal bore
Twin tube design
High temperature, all weather oil
18mm, double chrome-plated rod
Additional welding on all studs & eyerings
Multi stage Velocity Sensitive Valving
Rod wiper seal and multi lip seal
Hydraulic rebound stop

( 4W-NIS-062/07) 4W-NIS-062/07 COMPLETE STRUT ASSEMBLY FRONT

NISSAN / PATROL / 2013-UP

DESCRIPTION Front Set of 2 Coil Spring Strut Assembly Tough Dog Set of 2 Coil Spring Strut Assemblies Official Tough Dog Dealer Product Type: Tough Dog - Coil Spring Strut Assembly MORE DESCRIPTION Supplied as a single unit, please order two when ordering. Tough Dog’s award winning Foam Cell shock is our best selling shock for all round performance. Whether you head bush on the occasional weekend or for the majority of the year, Foam Cell shocks will handle your application. The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade. Large 41mm internal bore Twin tube design High temperature, all weather oil 18mm, double chrome-plated rod Additional welding on all studs & eyerings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop

DESCRIPTION
SS5922-P/S 4X4 Steering Damper Tough Dog suits Jeep Grand Cherokee ZG ZJ
Tough Dog Coil Over Return to Centre 4x4 Steering Dampener
Official Tough Dog Dealer.
This Tough Dog RTC (Return to Centre) Steering Stabilizer is a great improvement in the steering performance of your 4x4. A must for anyone going offroad or fitting larger tyres.
Product Type: Tough Dog - Steering Damper

DESCRIPTION
SV5617 4X4 Steering Damper Tough Dog suits Nissan Patrol GU Y61
Official Tough Dog Dealer.
TOUGH DOG's award winning SV Adjustable Steering Stabilizer

Featuring "9 Stage Adjustable Valve" for the Ultimate in Steering Control
* 22mm Chrome Rod with 35mm Bore
* Reinforced welding on pins and eyerings
Another world first for ToughDog.
Product Type: Tough Dog - Steering Damper

Constant 300Kg Load Swb (40Mm Lift (Also 0-300Kg For Lwb))

Tough Dog rear springs with 40mm raised height. (sold in pairs)

The Tough Dog coil springs are designed and manufactured in Australia, and in most cases use the new generation X5K steel in the manufacturing process. An extremely high quality coil spring.

( 4W-TDC632L) 4W-TDC632L SPRING CONSTANT 300KG LOAD 35MM LIFT REAR

MITSUBISHI / CHALLENGER / 2000-2007

DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 40mm Lift Spring COMPATIBILITY Mitsubishi Pajero 8/1988 - 1991 (NF-NG) and 5/1991 - 2000 (NH-NL) Coil Rear - REAR

DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.

Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.

Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available

SPECIFICATIONS
25mm Lift Coil

COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) suits 2in Lift SWB w/Bar - FRONT

25Mm Lift Coil (Suit Swb With Alloy Bar)

DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.

Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.

Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available

SPECIFICATIONS
25mm Lift Spring

COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB - REAR

25Mm Lift 0-300Kg Load (Suit Lwb)

DESCRIPTION
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.

Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.

Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available

SPECIFICATIONS
50mm Lift Coil

COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift LWB up to Bullbar - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Leaf) suit up to Bullbar - FRONT Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) suit up to Bullbar - FRONT Nissan Patrol 1988 - 2015 Y60/Y61 (GQ, GU) - Armoured B2-110kg, B3-150kg, B4-240kg - FRONT

50Mm Lift Coil ( Suit Lwb Up To Bulbar)

DESCRIPTION
Designed in Australia, Tough Dog leaf springs offer a spring pack for just about any application you might require. Our springs are a proven performer in any situation.


Tough Dog leaf springs are a truly progressive rate leaf spring. Each leaf is set slightly higher than the leaf above so there is contact along the whole length of each leaf. There are single stage and two stage springs available for different applications. Primary and secondary stage leaves ensure that the vehicle’s ride remains uncompromised. As the spring is compressed under load, the heavier second stage leaves come into play to prevent excessive sag & remove high stresses from the primary stage.



Precision mandrel & die-formed
Oil quenched, hardened & tempered for maximum life.
Military wrap for safety
Accurately heat-treated
Manufactured from high grade spring steel
Anti-friction pads in most applications
Pre-stressed to maintain ride height
Diamond cut ends
Load rate tested

SPECIFICATIONS
40mm Lift Spring

COMPATIBILITY
Nissan Pathfinder 11/2005 - 2015 R51 - 2.5L, 4.0L - REAR - 40mm Lift Spring Nissan Pathfinder 11/2005 - 2015 R51 - 3.0L V6 - REAR - 40mm Lift Spring

SPECIFICATIONS
40mm Lift Spring

COMPATIBILITY
Toyota Fortuner 2004 - 12/2015 Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Hilux 04/2005 - 2015 KUN26R (Coil/Leaf) Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Prado 02/2003 - 2010 120 Series LWB and SWB Petrol/Diesel/Bar - FRONT - 40mm Lift Spring Toyota Prado 2010+ 150 Series SWB - Bar & Winch - FRONT - 40mm Lift Spring

DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.

COMPATIBILITY
Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR

DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.